DeRun Energy Co.,Ltd

Address: Room 2101, Building 1, No. 6 Shuguang Xili, Chaoyang Dist., Beijing , P.R.China.
Postal code: 100028
Tel: +86 10 58677866
Fax: +86 10 58677866
Download DeRun Brochure

Solid liquid separation horizontal decanter centrifuge (Decanter Centrifuge for short), one of key machines for solid liquid separation, separates suspension liquid for two or three (multiple) phase materials in different specific weights by centrifugal settling principle, especially clarifies liquids containing suspended solid.

Such centrifuge applies to solid liquid separation of suspension liquids with solid phase particle equivalent diameter ≥3μm, weight concentration ratio ≤10%, volume concentration ratio ≤70% or solid liquid density difference ≥0.05g/cm3.

DeRun has different series of decanter centrifuges with bowl diameter from 200~1100mm.The machine can be also sorted by bowl type, such as thickening, dewatering, classifying, clarifying etc., to be fit for different separations.

Working Principle of Centrifuges

  •  Working Procedure

Decanter can use limit space to fit together different stages of separation.

  • Mixing and Accelerating Stage

Sludge and chemical mixes in the specially designed feed chamber and accelerates together. This prepares the sludge for best separation.

  •  Clarifying Stage

The flocculants sediments inside the bowl under centrifugal force, the clear liquid flows out of the weir an the end of the bowl.

  •  Pressing Stage

Conveyor pushes the solid toward the discharge end. The sludge is further pressed by centrifugal force and the water comes out of the small holes of the sludge.

  •  Double-direction Pressing Stage

In the conical part of the bowl wall, the sludge is pressed by specially designed double direction pressing effect. The specially designed conveyor produces axial pressing force and water comes out of the tiny holes of the sludge.

  •  Control the Staying Time of Solid

In order to achieve best dewatering effect when flow rate or character of sludge changes, the solid content inside the bowl should be continuously controlled. This is controlled by the drive system of the conveyor. The drive system of the conveyor can measure real-time the solid content inside the bowl and adjust automatically, solid discharge torque automatically compensated.

  •  Drive Technology

The reliable and excellent operation needs good cooperation of bowl drive and conveyor drive. Luhai Centrifuge Institute researches good drive combination, which can be recommended as best design to suit different applications.

  •  Bowl Drive System

Alternatives includes:

AC Motor + Frequency Converter

AC Motor + Hydraulic Coupling

Other Special Ways

  •  Conveyor Drive System

Alternatives includes: Frequency converter back or forward drive 

DeRun Decanter Centrifuge Parameter